Pellet stoves installed, serviced and cleaned so they feed, burn and vent as they should through the heating season.
A pellet stove burns small compressed pellets of wood in a controlled way. It feeds itself from a hopper, lights electronically and holds a steady temperature with a thermostat. That convenience comes with moving parts: an auger, fans, igniters, sensors and a vent pipe, and they all need attention to keep the stove running well.
We install pellet stoves with the correct vent pipe and clearances and service existing ones with a thorough cleaning and a check of the working parts. Ash and clinkers in the burn pot, a dusty exhaust fan or a worn gasket can make a stove struggle, so a yearly service, ideally before the heating season, keeps it dependable.
Pellet stoves vent through a small pipe that can go through a wall or the roof. It needs the right pipe and termination and must be sealed. We install both.
We clean the burn pot, heat exchanger, fans and vent, check the igniter and sensors and replace worn gaskets. A stove that is cleaned runs hotter and uses fewer pellets.
Stoves that will not light, shut off by themselves or fill with smoke are usually dirty or have a worn part. A service call finds the cause.
Good, dry pellets burn cleanly. We give tips on storing and choosing pellets so you get the best from your stove.
Drag the handle to compare.
BeforeAfterSealed and safe.
Burn pot to vent.
Igniter, fans, gaskets.
Cleaner burning.
Choose and store pellets.
Fix what is needed.
Every topic has its own page with what to expect and how we approach it.
Project situationFirst Fire of the SeasonThe first cold night is not the time to find out your chimney needs work. Here is how…Learn more 
Project situationUnused FireplacesA fireplace that sat cold for years can heat the home again. Here are the steps and the…Learn more 
Project situationNew Construction and AdditionsNew homes and additions need chimneys built to draw well and meet the rules. Here is how we…Learn more Tell us what you burn and how often to see when your chimney should be swept and inspected.
You tell us about the chimney, fireplace or stove and what you have noticed, and we set a visit that fits your day.
We look closely at the chimney, inside and out, ask how you use it and take photos of anything of note.
We explain what is urgent, what can wait and what is optional, and give you a written scope and options.
We lay drop cloths, seal the firebox and protect the roof and landscaping before any work begins.
We sweep, repair or install with the right tools and materials, checking our work as we go.
We clean up, show you what we did, share tips and set a reminder for your next visit.
Dirty burn pots, clogged vents, a failing sensor or poor pellets are common causes.
Light cleaning weekly during use, and a full service once a year.
They need a proper vent pipe, which can often run through a wall.
Yes, with the vent, hearth pad and clearances.
Most need electricity. A battery backup can help.
Wood Stove and Insert CleaningCleaning of the stove body, baffles, stovepipe and flue so efficient wood heating stays efficient and safe through…Explore 
Wood Stove InstallationA new wood stove set on a safe hearth with the right pipe, clearances and liner, ready to…Explore 
Stove Pipe and Connector ReplacementRusted, loose or poorly fitted stovepipe replaced with tight, correctly sized pipe and a safe connection to the…Explore 
Annual Chimney Maintenance PlansA simple yearly visit that sweeps, inspects and photographs your chimney, with reminders so nothing gets missed.Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
